Description
Features
Motors are very sturdy and oversized, to withstand heavy loads and last a long time even at great
depths of immersion.
CABLES: The power cables are equipped with connection plug to be sure that the internal cooling liquid,
even if alimentary and non-toxic, FDA approved, can not climb by capillarity along the line.
MECHANICAL SEAL: A strong mechanical seal provides a long life to motor even in presence of sand.
ROTOR SHAFT: The protrusion of the rotor shaft is of stainless steel while an oversized diaphragm of compensation
allows the internal cooling liquid to compensate differences of volume due to temperature variations.
Technical specifications
- Motor flange: 4” NEMA Standard
- Degree of protection: IP 68
- Insulation class: F
- Voltage tolerance: -10% / +10%
- Pumped liquid tempetature: 0ºC – 35ºC
- Min. cooling flow: 0,1 m/s
- Max. starts/hour: 30
- Mounting: Vertical or horizontal
- Max. immersion depth: 120m
- Thrust load:
from 0.5 Hp to 1Hp = 1500N
from 1.5Hp to 2.5Hp = 2500N
from 2.5Hp to 10Hp = 4500N
